Freeware: Udp

	Network Commander  License: Freeware
	This application was written due to a lot of frustration from my side, I have been working a lot with network configurations, routers setup (networking maintenance, in general). I didn’t have any good tool that will help me with the little things. I hate going to command prompt and run programs like, ping, tracert, net stat, etc. While administrating couple of small networks, I found out that it will be much more easier to keep all of the clients well updated by enabling the option of controlling them remotely. Of course there are a lot of software out there that can remotely control a client but I wanted the process to be transparent to the client side. I wanted something that will give me the ability of installing software on the remote side without kicking the user out from its own machine (for example, installing an update of virus definitions). Installing client side software was out of the question, I don't like to walk to each and every computer on the network and installing a "listening" software manually. The Network Commander is able to connect to any client on the network, executing processes, ending processes, running DOS commands and more just at a click of a button from the server side. Couple of more convenient features where implemented to make your life much more easier: port scanner, that can scan a range of IP address for open/closed ports, network utilization that can enumerate the current network usage, TCP/UDP/ICMP/IP statistics for the current machine and more.. Author: Private Programmer| Date: 25-09-2004 | Size: 9063 KB
	-

	P2P VoIp  License: Freeware
	The program is used for conversation in a local network. The voice packages are transmitted in a format GSM6.10. Voice packages and service information use one and the same UDP port: 4444. The program works without Server. The ContactList traces if the client is online or offline in a network. Mixer allows to control sensitivity of a microphone and loudness of speaker. Simultaneous work with 5 clients. The sound card should be duplex. The program is distributed with the source code. Author: Ivan Sorokin| Date: 08-06-2004 | Size: 684 KB
	-

	TrafficEmulator  License: Freeware
	Nsasoft Network Traffic Emulator generates IP/ICMP/TCP/UDP traffic from clients to server to stress test servers, routers and firewalls under heavy network load. It is a very simple and fast program which can simulate client activity. The tool is designed with a user-friendly interface and is easy to use. Author: Nsasoft LLC.| Date: 21-10-2005 | Size: 427 KB
	-

	OstroSoft Winsock Component  License: Freeware
	COM library for Visual Basic 6, providing an easy access to the network layer of operating system (UDP and TCP sockets). OSWINSCK.dll serves as a wrapper for Winsock API and helps programmers to abstract from complexity of API calls and concentrate on application functionality. Author: OstroSoft| Date: 14-03-2004 | Size: 29 KB
	-

	TheOne SysLog Sender Free Edition  License: Freeware
	Syslog Sender Free Edition is a free syslog tool. It can simulate networking device such as router, firewall and servers to send TCP and UDP syslog message to syslog server. You can use this free tool to evaluate the performance of your syslog server. SysLog Sender is based on internet standard protocol, which is specified by RFC 3164 and RFC 3195. Requirement : [Operating System] Syslog Sender supports the below OS : 1. Microsoft Windows 95 / 98 / NT 2. Microsoft Windows XP 3. Microsoft Windows 2000 Server and Professional with SP4 4. Microsoft Windows 2003 Server 5. Microsoft Windwos Vista [Hardware Requirement] Below hardware is required in order to install and run the Syslog Sender : 1. PIII processor (or equivalent) and later 2. 256MB RAM or above 3. 10MB Harddisk available space or above 4. 10/100 or wireless LAN card Author: TheOne Software Corporation Limited| Date: 02-05-2008 | Size: 2342 KB
	-

	3Com 10/100/1000 PCI-X Server Network Interface Card - 3C996-T  License: Freeware
	3C996 Family beta driver version 2.37 for Netware 4.x, 5.x, and 6.x. This unsupported beta driver resolves issues involving lost UDP traffic, time synchronization problems, duplicate MAC addresses, and communication problems after applying NW5.1 sp5 or NW6 sp2. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: 3Com| Date: 17-01-2003 | Size: 50 KB
	-

	easy Look at Packets  License: Freeware
	"easy Look at Packets" is a simple packets sniffer. Packets are filtered by incoming and outgoing, by IP addresses, ports and protocols - TCP, UDP, ICMP, IGMP. Programm does not demand installation and is very simple in management that is important for beginning managers of system. Besides there is no need in third-party libraries, such as WinCap, etc. Author: Look@Net.com| Date: 17-10-2006 | Size: 100 KB
	-

	easy Look a Packet  License: Freeware
	easy Look a Packet is a simple packet sniffer. Packets are filtered by incoming and outgoing, by IP addresses, ports and protocols - TCP, UDP, ICMP, IGMP. Programm does not demand installation and is very simple in management that is important for beginning managers of system. Besides there is no need in third-party libraries, such as WinCap, etc. Author: Look@Net.com| Date: 16-08-2006 | Size: 81 KB
	-

	3Com Gigabit Server NIC - 3C996B-T  License: Freeware
	3C996 Family beta driver version 2.37 for Netware 4.x, 5.x, and 6.x. This unsupported beta driver resolves issues involving lost UDP traffic, time synchronization problems, duplicate MAC addresses, and communication problems after applying NW5.1 sp5 or NW6 sp2. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: 3Com| Date: 17-01-2003 | Size: 50 KB
	-

	RemoteNetstat  License: Freeware
	Remote Network Statistics displays remote network computer IP, ICMP, TCP, UDP and Server statistics, shows the details about IP datagrams including forwarding enabled-disabled state , default time to live, the number of received datagrams, datagrams with address, header, protocol errors, forwarded datagrams, incoming datagrams that have been discarded, delivered datagrams , sent datagrams, routing datagrams that have been discarded, datagrams withought routing , interfaces , local host Ip address, TCP segments including timeout algorithm , minimum and maximum timeouts in milliseconds,the number of maximum connections , opened active and passive connections, failed connections, reset connections, currently established connections, received segments, sent segments, retransmitted segments, received errors, segments, which have been sent with reset flag, cumulative connections, details about UDP datagrams the number of received datagrams, datagrams without port, datagrams with errors, sent datagrams, listening connections, ICMP messages in incoming and outgoing states including the number of messages , errors, unreachable messages, TTL exceeded messages, messages with parameter problems, source quench messages, redirected messages, echo messages, echo replies, time stamp replies, address mask messages, address mask replies,etc. You must have administrative privileges on the remote network computer. All the mentioned features are provided with a user friendly graphical interface. Author: Nsasoft LLC.| Date: 08-02-2006 | Size: 434 KB
	-

	Kiwi Logger  License: Freeware
	Kiwi Logger (KLOG) is a free suite of syslog message sending tools for Windows. The tools allow you to add syslog message sending capabilities, via UDP or TCP, to your applications. The syslog messages can be received by Kiwi Syslog Daemon or compatible Syslog Daemons. You can access KLOG via console command line, Windows command line, Win32 API DLL, .Net DLL, COM DLL or ASP DLL. Integration examples are included for command line, C, Visual CPP, .Net and Visual Basic. The DLL can be dynamically or statically linked via the included library file. Author: Kiwi Enterprises| Date: 23-08-2006 | Size: 236 KB
	-

	3Com Gigabit Fiber-SX Server NIC - 3C996-SX  License: Freeware
	3C996 Family beta driver version 2.37 for Netware 4.x, 5.x, and 6.x. This unsupported beta driver resolves issues involving lost UDP traffic, time synchronization problems, duplicate MAC addresses, and communication problems after applying NW5.1 sp5 or NW6 sp2. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: 3Com| Date: 17-01-2003 | Size: 50 KB
	-

| 1 |