Freeware: Synth

	MIDIoz Arp Lite  License: Freeware
	With this software you configure a "music engine" adjust its settings and makes of your soundcard or any MIDI synth a powerfull music machine, algorithmically generate music for arpeggios, ambiental sounds etc.. it is Freeware Author: MIDIoz Software| Date: 11-06-2002 | Size: 1100 KB
	-

	Hercules Game Theater XP series v. 5.02  License: Freeware
	For users who wish to use the cards hardware synthetiser and MIDI soundbanks features of the card for music production. This version adds a tab in the control panel to customize the synth and MIDI settings. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/Me/NT/2000/XP Author: Hercules| Date: 06-02-2003 | Size: 50 KB
	-

	Hercules Gamesurround Fortissimo III 7.1 v. 5.02  License: Freeware
	For users who wish to use the cards hardware synthetiser and MIDI soundbanks features of the card for music production. This version adds a tab in the control panel to customize the synth and MIDI settings. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Hercules| Date: 06-02-2003 | Size: 50 KB
	-

	Hercules Gamesurround Fortissimo III 7.1 v. 6.09  License: Freeware
	For users who wish to use the cards hardware synthetiser and MIDI soundbanks features of the card for music production. This version adds a tab in the control panel to customize the synth and MIDI settings. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Hercules| Date: 06-02-2003 | Size: 50 KB
	-

	MIDInight Express  License: Freeware
	The MIDInight Express II is a free, real time, emulated wavetable MIDI jukebox and renderer. No wavetable cardis required. It can also copy its output to a WAV file for fast MID to WAV rendering. Author: Polyhedric Software| Date: 24-04-2002 | Size: 3800 KB
	-

	SVArTracker  License: Freeware
	Advanced music creation tool. Next generation of trackers. Modular virtual studio. * Compatibility with thousands of virtual instruments - can load VST, VSTi and DirectX DMO plugins. * Integrated sampler. Up to 15 typical tracker effects support. * Can import next types of song modules: IT, Impulse Tracker module XM, Fast Tracker 2 module S3M, Scream Tracker module MOD, ProTracker module MID, MIDI file and others: rmi,amf,ams,669,dbm,dmf,dsm,far,mdl, med,mt2,mtm,okt,psm,ptm,ult,umx * All internal operations are 32-bit floating point, except calculations requiring 64-bit floating-point precision. * DirectX wave and MIDI driver output. * Midi input * Asio output driver support (experimental mode) * Renders wave file (PCM16 PCM32 FLOAT32 at 22100-196000 Hz). * Standard windows interface Author: SVAr software| Date: 14-01-2007 | Size: 6448 KB
	-

	MIDICLOCK  License: Freeware
	DESCRIPTION: ------------------------ MIDICLOCK can be used for synchronization of MIDI devices. The BPM rate of the clock signal can be set, and the MIDI real time clock protocol is sent out with the precision of the Windows multimedia timer. The clock signal can be started/stopped/adjusted by pressing keys or sending MIDI-IN patch change commands. HINTS: ------------ 1. MIDIClock can be used to synchronize multiple sequencers/synths. You can do this using MIDIYoke (get it at www.midiox.com). Connect MIDIClock to MIDIYoke Junction 1 output. As MIDIYoke is a multiclient driver, you can connect multiple sequencers/synths (such as rebirth, AN1x,...) to MIDIYoke Junction 1 MIDI input. 2. Don't forget to push Ctrl+Alt+s if you wish to save your settings. It saves into clockpresets.ini. 3. Basic MIDI control (program change) of tempos can be set from the GUI. Just send the desired patch change to the program's selected midi in. Adjust to the according tempo and press apply. The program change message is now linked to the tempo. Midi channels are numbered from 1 to 16. The Program numbers are numbered from 1 to 128. 4. By editing the clockpresets.ini file, you can achieve even more advanced remote control of midiclock. Enable HexSpy to monitor the incoming midi messages. It will help you determine which entries you need to add to the ini file. The BPM_PRESETS section contains the tempo settings for all patch selects. You can add action codes to any of these entries. Additionally you can add special commands which translate an incoming midi message (such as midi control messages) into a midiclock action. This is done in the SPECIAL_COMMANDS section. See http://serge.ucapps.de for more details... Author: Serge D.| Date: 31-05-2004 | Size: 314 KB
	-

	BankStep  License: Freeware
	BankStep is a software emulation of hardware bank sequencers found in the big analog synthesizers, that produce control for the sound but not the sound itself. Instead of analog control voltages BankStep produces MIDI (and can make standard MIDI music files). Otherwise, BankStep functionally emulates a big $50,000 bank of hardware sequencers and supporting modules just as it might sit on top of a big Moog analog synthesizer - or your soft synth, MIDI module or sound card. The main module in BankStep is the Bank module, which is a 3 or 4 bank knob sequencer of any number of columns up to 48. The Bank module is a "smart" module, with the ability to set sequence start and end points, and to automatically switch direction when the end points are reversed. There are no dangling patchchords in BankStep. Instead, module inputs (the red and blue buttons) connect to outputs by selecting them from a popup menu of all available outputs. When an input is connected to an output, the input button label indicates the connection. Like the hardware sequencers it emulates, BankStep is modular in concept but it is not modular in the sense that you create modules as part of the composing process, as you would with our other MIDI composing software, SoftStep and ArtWonk. While you are free to create your own module Layouts, this should not be part of your composing process, just as specifying the modules of a hardware modular synthesizer is separate from the use of the modules in creating the music. This is less flexible than SoftStep or ArtWonk, but it is often easier to get started with; and because you likely will use the same layout over and over, you become familiar with it. With BankStep, you are not creating an algorithmic music composition so much as you are creating music with a stack of sequencers, just as you would if you had a stack of hardware sequencers. But with BankStep, you can have a lot more of them to work with! Author: Algorithmic Arts| Date: 02-02-2006 | Size: 4108 KB
	-

| 1 |