Freeware: Smartcard

	CardPro  License: Freeware
	All round Phoenix smartcard programmer for all current smartcards like titanium, MII, KNOT, funcard and MII smartcards. Can easily be used to update a cam like the Joker or Matrix. Switches automatically between different modes. Reading/writing of the whole card is done without intervention. Loaders are in the program. Cards currently supported: titanium, MII, KNOT, Funcard, Jupiter1, Jupiter2, GoldCard, PicCard2. Easy to use. Crd EEPROM file support. The RS232 Cardreader is an encased programmer which can be used for EEPROM, AVR and PIC programming. The required RS232 Cardreader is capable of the following modes: Phoenix 3.57MHz and 6MHz for EEPROM programming like Titanium, MII, KNOT or Funcard Smartmouse 3.57MHz and 6MHz JDM mode for PIC programming like in a goldwafer and piccard2 AVR SPI mode for Jupiter 1 and 2 & Funcard Author: Argolis BV| Date: 12-10-2004 | Size: 345 KB
	-

	USBLoad  License: Freeware
	The funcard USB software is especially developed for all who regularly use a standard/slow funcard 6 for eg updating a CAM. Programming a standard funcard 6 to update a CAM takes minutes. The fun USB is the solution for time consuming updating of a cam and a good alternative for the CAS interface. When the funcard USB has been programmed it acts like a “standard’ funcard 6. All USB communication takes place in the funcard USB. So you can program the funcard USB with full USB speed. The programmer is just a simple interface to establish the connection between computer and smartcard. Programming the complete fun USB takes just 11.5 seconds. It takes several minutes with other programmers to program a standard funcard 6! Author: Argolis BV| Date: 05-10-2004 | Size: 379 KB
	-

	Smartedit  License: Freeware
	Text editor for funcard and goldcard smartcards. You can store compressed text on your goldcard or funcard. The text editor has -besides the same features like a regular texteditor- also the capability to save the text on a funcard/goldcard. For smartedit you need our Phoenix RS232 smartcard programmer, which also can be used for all current smartcards like titanium, MII, KNOT, funcard and MII smartcards.The RS232 Cardreader is an encased programmer which can The required RS232 Cardreader is capable of the following modes: Phoenix 3.57MHz and 6MHz for EEPROM programming like Titanium, MII, KNOT or Funcard Smartmouse 3.57MHz and 6MHz JDM mode for PIC programming like in a goldwafer and piccard2 AVR SPI mode for Jupiter 1 and 2 & Funcard be used for EEPROM, AVR and PIC programming. For further information you can visit www.argolis.com. Author: Argolis BV| Date: 25-10-2004 | Size: 280 KB
	-

| 1 |