Freeware: Input-signal

	AD-Converter  License: Freeware
	This program is actually an analog-to-digital converter. It is intended to digitise the signal coming from the soundboard. There are two modes of operation: (i) input-signal (oscillograph) mode and (ii) spectrometer mode - can be used as the recording device of a spectrometer IKS-29. Author: Sharo Ltd.| Date: 15-11-2003 | Size: 258 KB
	-

	BREAKTRU AUTOSIM  License: Freeware
	A simulation of a NYC Transit Authority train traveling by automatic signals with working stop arms. Working circuit drawings show how the signal system relays function while the train passes over track circuits. Good learning tool. Real photos used in the program design. Author: BREAKTRU SOFTWARE| Date: 22-02-2004 | Size: 2986 KB
	-

	MIDICLOCK  License: Freeware
	DESCRIPTION: ------------------------ MIDICLOCK can be used for synchronization of MIDI devices. The BPM rate of the clock signal can be set, and the MIDI real time clock protocol is sent out with the precision of the Windows multimedia timer. The clock signal can be started/stopped/adjusted by pressing keys or sending MIDI-IN patch change commands. HINTS: ------------ 1. MIDIClock can be used to synchronize multiple sequencers/synths. You can do this using MIDIYoke (get it at www.midiox.com). Connect MIDIClock to MIDIYoke Junction 1 output. As MIDIYoke is a multiclient driver, you can connect multiple sequencers/synths (such as rebirth, AN1x,...) to MIDIYoke Junction 1 MIDI input. 2. Don't forget to push Ctrl+Alt+s if you wish to save your settings. It saves into clockpresets.ini. 3. Basic MIDI control (program change) of tempos can be set from the GUI. Just send the desired patch change to the program's selected midi in. Adjust to the according tempo and press apply. The program change message is now linked to the tempo. Midi channels are numbered from 1 to 16. The Program numbers are numbered from 1 to 128. 4. By editing the clockpresets.ini file, you can achieve even more advanced remote control of midiclock. Enable HexSpy to monitor the incoming midi messages. It will help you determine which entries you need to add to the ini file. The BPM_PRESETS section contains the tempo settings for all patch selects. You can add action codes to any of these entries. Additionally you can add special commands which translate an incoming midi message (such as midi control messages) into a midiclock action. This is done in the SPECIAL_COMMANDS section. See http://serge.ucapps.de for more details... Author: Serge D.| Date: 31-05-2004 | Size: 314 KB
	-

	Digital Guitar Tuner  License: Freeware
	Digital Guitar Tuner is a free Windows software, which let's you accurately tune your guitar using direct input, microphone or MIDI tones. Now a new version 2.3 is available for downloading. Now it features 27 tuning types! Features:   * High accuracy (uses 16 bit / 44100 Hz input!)   * You can tune guitars with no signal output (through microphone)   * 27 different tuning types (standard, lowered, dropped, open tunings, Hawaiian etc.)   * Modulation of root frequency   * Tuning with midi tones   * Nice and simple environment   * it's free! Author: AEON GROUP spol. s r.o.| Date: 24-08-2007 | Size: 991 KB
	-

	Meta Trader Account Copier  License: Freeware
	The purpose of this software is to help traders, who use Meta Trader 4 trading terminal, in their routine work with trading signals. Some traders, who can not trade successfully by themselves, prefer to copy trades of professional traders. Some successful traders would like to increase their profit by selling trading signals. But it is very hard task to process those signals manually. You should wait for those signals 24 hours a day, what can happen if you were away from your computer when signal came? You can lose your money. With this software you can do what you want while computer is working for you, it does not require any supervision. It just copies trading account of the signal provider to your account, trade by trade, 24 hours a day. And much more: you can copy not only one account, but unlimited number of accounts from different providers to your single account. If signal provider trades with small money, for example $1.000 and your account is $10.000 you can adjust multiplier 10 and when provider buys 0.1 lot, software will buy 1 lot on your account, or in opposite situation you can decrease lot. Every account can be adjusted separately. If you want to have manual confirmation you can disable trading functions and this program will notify you about all changes that happened on the provider's account without modifying yours. Author: Forex Tester Software| Date: 01-08-2007 | Size: 786 KB
	-

	Sonix  License: Freeware
	A single stream quasi synchronous granulator which also features an analog filter to further manipulate the sound with a smooth lowpass,phatpass(with some big bottom end)and highpass formant hybrid settings.The sonix interface is very easy on the eyes and the gui gives sonix the look of hardware rather than software.All the main controls can be automated of course so you get 'full control'over your audio grains,and metering is courtesy of a standard rms sensing VU which monitors the mono input level only.Sonix buffers input audio and releases it in discrete grains of a specified duration, at a specified rate. Random variation can also be applied to the grain length and grain rate,and the grains amplitude can be shaped with six different envelopes.Features:Random grain variation,Grain pitch control,Auto pitch variation,Hybrid analog filter,Panning,Grain shaping envelopes,Wet/dry signal control,Full automation,Hardware look,Traditional VU meter,Interface is easy on the eyes. Author: JC Productionz| Date: 07-08-2006 | Size: 1027 KB
	-

	Input Director  License: Freeware
	Input Director is designed for those folks that have two (or more) Windows systems set up at home. Using Input Director, you can position the monitors of your systems side-by-side and then control all of them via one keyboard/mouse. To transition which system you're controlling is as simple as moving the cursor off the screen on one system and it'll pop up on the next screen (similar to a multi-monitor setup) or via a hotkey combo.    Input Director also lets you share clipboard contents, so you can copy from one machine, switch over to another and then paste. This also works for files that are in network shared directories.    New features include:   * Mirror input mode - Mouse and keyboard input is simultaneously sent to all systems   * Keyboard Macros   * Ability to skip slaves (great for dual-boot systems)   * Visual indicator to help identify the cursor location on transitions between systems   * Numerous bug fixes   * Improved usability Author: Shane Richards| Date: 10-11-2007 | Size: 378 KB
	-

	AirGrab WiFi Radar  License: Freeware
	AirGrab WiFi Radar is a tool to display information about Apple Airport base stations and other WiFi (802.11b/g/n) wireless access points. Using AirGrab WiFi Radar you can determine most popular WiFi channels and select optimal channel for your WiFi network. Signal level and Noise level helps to diagnose common wireless network problems and optimally position your base station and or computer to achieve the best possible signal strength. Encryption status of network shows WEP, WPA, WPA2 modes of all immediately available WiFi networks. Features:  # Full info about WiFi network security (WEP, WPA, WPA2, TKIP, AES)  # Graphs WiFi connections statistics: signal, security, noise, SNR, transmit rate, and comm quality.  # Complete Graph for all WiFi Chanels  # Customizable refresh rate.  # Wifi Report to HTML and Graph  # Logging Of All Encountered Access Points.  # Mac Universal Binary and Intel Optimized binary.  # Stats About Currently Connected Wireless Network.  # Easy To Use Interface. Author: AirGrab| Date: 26-08-2008 | Size: 2632 KB
	-

	Atanua  License: Freeware
	Atanua is a real-time logic simulator designed for educational use. It has an intuitive, OpenGL accelerated user interface, with which the user can place components and wires. Components include all common logic blocks, including gates, latches and flipflops. Additionally Atanua simulates about 30 different 74-series chips, as well as an 8051 microcontroller variant. Simulated and pure logic parts can be mixed in the same circuit. On the I/O front, Atanua includes several different frequency clock inputs, constant level inputs as well as buttons that are bound to the user's keyboard. LEDs in various colors as well as 7-segment displays are also included. There is also a simple logic probe for debugging. The simulated parts are designed to resemble their real-world counterparts, which is more attractive for the students than pure schematics. The students can practice lab experiments using the simulated chips. The simulation shows the signal state of each wire in real time. In addition to high and low signal level, parts may output "invalid" signal, stating that there is a problem with the circuit, such as outputs connected together, or missing wirings from some chip. Additional parts can be made using the plug-in interface. As an example plug-in, a driver for the Velleman K8055 USB experiment board is provided, with which the user can mix simulated and real-world components. An anti-cheating tool is also available for teachers who wish to use Atanua for homework. Author: Jari Komppa| Date: 27-03-2008 | Size: 1598 KB
	-

	Input Director  License: Freeware
	Input Director is designed for those folks that have two (or more) Windows systems set up at home. Using Input Director, you can position the monitors of your systems side-by-side and then control all of them via one keyboard/mouse. To transition which system you're controlling is as simple as moving the cursor off the screen on one system and it'll pop up on the next screen (similar to a multi-monitor setup) or via a hotkey combo. Input Director also lets you share clipboard contents, so you can copy from one machine, switch over to another and then paste. This also works for files that are in network shared directories. New features include:   * Slaves and the master can display a semi-transparent informational window that indicates which system currently has the cursor   * Can simulate Ctrl-Alt-Delete on a slave system   * Can synchronise locking some or all slaves with the Master   * Can synchronise a slave's screensaver with the Master's   * Can shutdown all (or a subset of) slaves from the Master   * Can control a locked slave   * Can control the UAC dialog box on a Vista slave   * Hotkeys can be used to relative jump to the next left or right system Author: Shane Richards| Date: 18-01-2008 | Size: 1007 KB
	-

	Quick Input  License: Freeware
	Quick Input software is used to speed up the typing of frequently repeated words and word combinations in all applications where developers have not implemented this feature. Using predictive technology, there is now no need to learn how to touch type on the keyboard! Quick Input software can be installed on your computer in order to considerably reduce the time required to type text! Following data entry into an application, Quick Input memorizes the data and on each subsequent occasion when the first letters are entered, a drop-down hint list of words is made available. The whole word will no longer have to be typed – just select the necessary word and press 'Enter'. The program will automatically type the selected word and even a whole sentence! The main features of Quick Input software: ▪ Operation in all applications ▪ Automatic addition of words being typed into the dictionary ▪ Addition of selected text to the dictionary when the corresponding key combination is pressed ▪ Addition of entire sentences when editing the dictionary ▪ Import and export of the dictionary as a text file ▪ Specification of the applications requring Quick Input assistance ▪ Customizable appearance of the drop-down word list Author: Whole Group| Date: 13-07-2007 | Size: 662 KB
	-

	Shuttle SB61G2 Bios v 03j  License: Freeware
	SB61G2 (FB61V1.x,V2.x)1. Update VGA BIOS 3396, 2. Fill DMI type1/2 for driver link, 3. Fixed TV no signal in DOS mode, 4.Add Shuttle XPC full logo at POST screen. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Shuttle| Date: 11-08-2005 | Size: 50 KB
	-

	WordConvs Free  License: Freeware
	This document conversion program allow batch conversion of documents using the converters included in Microsoft Word 7.0 or higher or an external program of your choice. Both the input and output format are selectable The use of WordConvs with an external converter program can be useful when the conversion program has not batch capability or don't allow to scan subdirectories or/and to process hidden files, as WordConvs has these capabilities. It is useful also when the converter has not an included mechanism to test the completeness of the conversion. Some converters in case of errors in input file truncate the conversion without any kind of indication. In case of processing of a large number of file this can be dangerous as you believe that the results are good whereas you can have as result truncated documents (only partially converted). To test, also if not in a secure way, this case, a program has been inserted which count the words, lines, and characters of the input document. As MsWord has internally the possibility to count them in the output document, it is possible to compare these counters. The input file counters are only an row approximation as only managing the formatting of the input document it is possible to have a good count. A program included in the setup counts words, lines and characters with a variable level of accuracy of the result, depending on the format of the document. For this reason the possibility to set the threshold of percent difference that give rise to a warning message, has been inserted, as well as the possibility to choose which of the 3 available counters to use. If you have a more accurate counting program you have the possibility to use it. Author: Telsys s.a.s.| Date: 03-10-2003 | Size: 1193 KB
	-

	BIGSPEED Voice Compression SDK  License: Freeware
	BIGSPEED Voice Compression SDK is a simple, low-complexity, low-cost voice engine for quick development of VoIP applications. It incorporates audio recording/playback and voice compression/decompresion in a single COM automation object, along with some advanced voice processing features.    The used audio format is wideband, 16kHz, 16Kbps, PCM. The compression ratio is adjustable and can vary from 4:1 to 50:1.    A lot of bandwidth can be addionally saved thanks to the silence compression. A voice activity detector (VAD) with an adjustable threshold level is used to distinguish between regions with normal speech activity and those with silence or background noise.    An optional echo suppression can be employed thanks to the robust double talk detector. When a double talk situation is detected, the output signal is faded (half-duplex).    An automatic gain control (AGC) system is implement with a dynamic range 10:1. A noise reduction is performed on the microphone signal to decrease the white noise.    BIGSPEED Voice Compression SDK utilizes an elegant event-driven paradigm for easy integration into Windows applications. A special attention is paid to provide responsive user interface while maintaining low CPU usage. Carefully designed set of properties, methods, and events offers great flexibility to develop innovative communication software. Sample applications are included in Visual Basic .NET, and Delphi 7. Author: BIGSPEED Computing Inc.| Date: 20-05-2008 | Size: 557 KB
	-

	PictView32 Console version  License: Freeware
	Fast command-line driven image converter supporting over 50 input formats and 21 output formats. Palette reductions, resizing etc. Batch conversion. Some of the supported file extensions are: AWD, BMP, BW, CAL, CDR, CDT, CLP, CMX, CPT, CUR, CUT, DCX, DIB, FLC, FLI, GIF, HAM, ICN, ICO, IFF, IMG, JFF, JIF, JMX, JPG, LBM, MAC, MIL, MSP, OFX, PAN, PAT, PBM, PC2, PCD, PCT, PCX, PGM, PIC, PNG, PNM, PPM, PSD, PYX, QFX, RAS, RGB, RLE, SAM, SCx, SEP, SGI, ST, STW, SUN, TGA, TIF, UDI, WBMP, WPG, ZBR, ZMF. Author: PictView| Date: 01-12-2002 | Size: 127 KB
	-

	FastCodec  License: Freeware
	FastCodec - free fast lossless video codec designed for video capture. Another usage - video data archiving. Supported input and output formats are: YUY2/YUNV/V422/YUYV, YVYU, UYVY/Y422/UYNV, RGB24, RGB32. Codec has two compression modes: lossy (only for RGB input) and absolutely lossless. Preview decompression mode allows fast decompression with poor quality. Codec supports logging during compression/decompression. With automatic CPU detection codec may choose optimal algorithm implementation. Processor with at least MMX instructuins is requred, SSE2 support is recommeded. Compression/decompression algorithm is relatively simple with low memory usage. It can be efficiently implemented in hardware. Author: VideoSoft.org| Date: 01-08-2006 | Size: 166 KB
	-

	Feet and Inches Calculator Freeware  License: Freeware
	Absolutely the best and easiest to use feet and inches (Architectural) calculator. The feet and inches calculator accepts all commonly used types of feet and inches input. The simple interface makes it extremely easy to use. The calculator can be closed to your system tray so it is always at your fingerips and ready to use. The units that can be shown are: Feet and Inches, Decimal Inches, Decimal Feet, and Millimeters. This feet and inches calculator has the ability to run in compact mode and accepts all input (including the feet and inches designators) from the numpad which make it extremely easy to use. Author: Stringer Software| Date: 05-01-2006 | Size: 1012 KB
	-

	xCap  License: Freeware
	xCap freeware Activex for display oscilloscope from audio input, very simple to use. Author: Alessandro Valenti| Date: 05-03-2004 | Size: 37 KB
	-

	PHP Cleaner  License: Freeware
	PHP Cleaner 1.0 - This little script removes the PHP line brakes you find in a lot of PHP source codes. Simply place the PHP input files in the INPUT directory and then start go.cmd. You can then find the resulting files, without the incorrect line brakes in the OUTPUT directory. They can then be opened with notepad correctly. You can also run PHP-cleaner.exe with as command line just one filename. Author: Cheap Airline Tickets| Date: 05-07-2006 | Size: 120 KB
	-

	Easy Tab Maker Pro  License: Freeware
	Easy Tab Maker Pro allows you to plug your guitar into your computer. While you play Easy Tab Maker Pro analyzes the pitch and tone of the signal transmitted from your guitar. It monitors the change and combination of the chords played. Then it analyzes the pitch and tone to determine which strings were played and where your fingers were at. Easy Tab Maker Pro then graphs the results as tablature. Author: VisAid Development, Inc.| Date: 22-11-2004 | Size: 5239 KB
	-

	pdc Form Reader  License: Freeware
	pdc Form Maker concept is based on the use of two programs. The first program pdc Form Maker, this program allows for the creation and testing of the form. The second program pdc Form Reader is an input program for filling in the forms and reading the forms. The form reader is a Free program. Both programs allow for multiple pages and multiple forms to be open at the same time. This allows for the transfer of information from one form to another, with the click of the mouse. You can view tips, user information boxes, instruction pages for the form and help functions that are integrate into the form. Input information to scanned forms and print the formation on pre-printer form. When you load a form and store the information you add the information to the form database. The created databases are searchable and allow for a wide range of search functions. The pdc web site contains a large assortment of forms to download. A large amount of the forms on the pdc web site are generic forms. The term genetic means that the designed allows the form to be used with both programs and things like the company name and other common information are changeable.  Author: Hobert Bradford| Date: 10-10-2003 | Size: 11823 KB
	-

	Gift Reminder Maker  License: Freeware
	The Gift Reminder Maker (TM) creates gift reminder personalized popups to help you remember to buy a gift. It's very easy to use. Each event is automatically set to remind you once per day. The only required input from you is the date when the reminder should appear. It's FREE, but don't let that fool you, this program is well thought out to be simple, intuitive, and truly useful. The reminder popups are fully under the user's direct control. There are NO advertizing popups. The download page features a 3 minute video demo, so that after installation the user knows exactly what to do. This software contains no spyware, no adware, and no viruses. The only advertizing content are two footer buttons which will invoke the default browser to render the sponsor's or author's websites. Author: Right Results Consulting LLC| Date: 21-08-2008 | Size: 392 KB
	-

	River Past Wave@MP3  License: Freeware
	River Past Wave@MP3 is a FREE WAV to MP3 converter and MP3 to WAV converter. It is extremely easy to use. Select the input file, and click "Convert", that's it! Convert your WAVE files to put on your portable MP3 player, or convert your MP3 files to burn to a CD. No Adware or spyware. DX8 required. (download link available on web site). Author: River Past| Date: 09-09-2004 | Size: 1583 KB
	-

	My DVD Catalog  License: Freeware
	My DVD Catalog is a simple dvd cataloger. Easily organize your DVDs by genre and rating. My DVD Catalog allows you to input DVD features and descriptions. Author: DVDCopy.cc| Date: 20-04-2007 | Size: 371 KB
	-

	Mini Calculator  License: Freeware
	Alternative Windows Mini Calculator with 2 views, general functions, Dec-Hex-Oct-Bin integers. Colorful, has tips and precision control. And Loan Calculator is also included. It has 2 operating windows - for result and for input. Accumulator - Memory mode is fully switchable. "Constant second operand" and "Paste & Copy" operations are implemented. Although it has 2 (or 4) output windows it remains tiny. Author: Kovalev Serguei| Date: 12-12-2005 | Size: 387 KB
	-

	Mobile Media Converter  License: Freeware
	The Mobile Media Converter is a free video and audio converter that uses ffmpeg to convert between popular desktop formats like MP3, Windows Media Audio (wma), Ogg Vorbis Audio (ogg), Wave Audio (wav), MPEG video, AVI, Windows Media Video (wmv), Flash Video (flv) and commonly used mobile phones formats like AMR audio (amr, awb) and 3GP video. An integrated YoutTube downloader is available for direct downloading and converting to any of these formats! The program has a very easy-to-use and simple GUI (Graphical User Interface) that helps even the most amateur user. Most of the times, the only data that you must enter is the input file(s) or just drag 'n' drop the input file(s)! The 3GP and AMR formats are used by mobile phones for MMS, for video and sound recordings, etc. Author: MIKSOFT| Date: -09-0805 | Size: 4 KB
	-

	FC_RTGraph  License: Freeware
	FC_RTGraph is a tool that allows you to collect and graph information from SNMP devices. FC_RTGraph takes an XML formatted config file as input. FC_RTGraph is an excellent tool for real-time monitoring. Collected SNMP data can be graphed in highly customizable 3D graphs (Bar, Area, Line, 3D). FC_RTGraph can be run on Microsoft Windows 2000/2003, XP and Vista. FC_RTGraph supports SNMPv1 + SNMPv2. The free version only supports the SNMP rfc1213 OIDs. The non free version, (expected release date Q2 2008), supports all OIDs. FC_RTGraph can be started from the commandline or through a shortcut on the desktop. The name and location of the config xml file can be specified using the /xml commandline switch. Author: Finnleys| Date: 16-01-2008 | Size: 1746 KB
	-

	pmaCalc  License: Freeware
	pmaCalc combines a scientific calculator, binary arithmetik for programmers, and unit converter in an interesting package. In addition to a fair range of scientific functions, it has an unusual numeric stack, and a binary mode that supports decimal, hexadecimal, octal, and binary arithmetic, with a full complement of logical operators and bit manipulation instructions. It has7 lines: hex, oct, dec, bin, ascii, 2's compl. and roman. Each line is clickable for new data input. The others immediately reflect that data input in their respective bases. You can enter expressions by pressing buttons or by typing them in (it's advisable to take care with the syntax), and the stack offers a flexible alternative to the usual memory functions. You can use fixed,floating and sci. point modes. Other features include a Euro converter that handles all European Union currencies, 150+ Units and 500+ Convertions. Author: Mario Prem| Date: 10-10-2003 | Size: 639 KB
	-

	Finger  License: Freeware
	Finger is the tool for discovering user information by using well known finger service. To use the finger tool enter the User@)Host in the Finger Input box, and click on the Query button. Author: Nsasoft LLC.| Date: 20-10-2005 | Size: 419 KB
	-

	Network Watcher  License: Freeware
	Network Watcher is windows application that helps you catalogue network computers and monitor their state. It now supports (or will in near future) various notifications - desktop message, net send, mail, etc when something happens, provides you with possibility to send Wake On Lan signal to some computer. You can use it also as a simple catalogue of your network. All data about machines is stored in XML file. It features: -Easy to use windows interface -Manually add one computer or automatically scan some network segment -Organizing computers in groups -Import data from other people -Various notifications when some computer go online or offline -Identification of NIC vendor Author: Hive Studios| Date: 01-05-2005 | Size: 152 KB
	-

| 1 | 2 | 3 | 4 | 5 |