Freeware: Fixed

	ECS NFORCE4-A754(1.0) Bios v 1.1a  License: Freeware
	-Support Athlon64 E6 2.0/2.2/2.4G CPU, -Fixed System Cannot Boot When E3 CPU Plug With 3 DIMMs., -Fixed The MemCLK Value Will Keep To Item Value., -Support Winbond W39V040BP Rom Flash., -Support AMD K8 754 CPU Ver E., -Update MCT2 memory Code., -Fixed System Cannot Enter S3 When Use USB Mouse and No PS2 Mouse., -To Support Sempron 754 REC.E3 CPU PST table, -Fixed DIMMs Compatibility, -Fixed Lan Led Issue., -Fixed BIOS Setup Screen Item Show Issue. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 29-09-2005 | Size: 50 KB
	-

	Abit IG-82 Bios v 1.5  License: Freeware
	- Update CPU micro code., - Enhanced PCIE VGA performance., - Added CPU FANEQ Control item., - Fixed CPU Warning Temperature abnormal., - Fixed CPU Shutdown Temperature abnormal., - Fixed an issue that UUID been clear if NETWORK Controller disabled., - Fixed BOOT Sequence abnormal., - Fixed FAN abnormal after resume from S1/S3/S4., - Fixed FAN Fail Alarm function failure., - Fixed BOOT Form LAN abnormal issue if have no LAN connected., - Remove IRQ14 & IRQ15 item., - BIOS compile date: 01/26/2005 Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Abit| Date: 26-01-2005 | Size: 50 KB
	-

	Abit IG-81 Bios v 1.5  License: Freeware
	- Update CPU micro code., - Enhanced PCIE VGA performance., - Added CPU FANEQ Control item., - Fixed CPU Warning Temperature abnormal., - Fixed CPU Shutdown Temperature abnormal., - Fixed an issue that UUID been clear if NETWORK Controller disabled., - Fixed BOOT Sequence abnormal., - Fixed FAN abnormal after resume from S1/S3/S4., - Fixed FAN Fail Alarm function failure., - Fixed BOOT Form LAN abnormal issue if have no LAN connected., - Remove IRQ14 & IRQ15 item., - BIOS compile date: 01/26/2005 Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Abit| Date: 26-01-2005 | Size: 50 KB
	-

	Abit IG-80 Bios v 1.5  License: Freeware
	- Update CPU micro code., - Enhanced PCIE VGA performance., - Added CPU FANEQ Control item., - Fixed CPU Warning Temperature abnormal., - Fixed CPU Shutdown Temperature abnormal., - Fixed an issue that UUID been clear if NETWORK Controller disabled., - Fixed BOOT Sequence abnormal., - Fixed FAN abnormal after resume from S1/S3/S4., - Fixed FAN Fail Alarm function failure., - Fixed BOOT Form LAN abnormal issue if have no LAN connected., - Remove IRQ14 & IRQ15 item., - BIOS compile date: 01/26/2005 Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Abit| Date: 26-01-2005 | Size: 50 KB
	-

	Magic Pro MP-P4GE-M+ Bios v1.06  License: Freeware
	1.Fixed string from "Auto" to "Default", 2.Added Fixed AGP/PCI Output Freq item, 3.Fixed show number of PCI slots and usb error on DMICFG, 4.Fixed system hang at POST C5 when overclock and reset it, 5.Fixed Vcore show too low on HW Monitor, 6.Update AWDFLASH.EXE from V8.19A to V8.22A, 7.Update VGA BIOS 2759 to fix S3 resume fail issue Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Magic Pro| Date: 22-02-2003 | Size: 50 KB
	-

	ECS NFORCE4-A754(1.0) Bios v 1.0d  License: Freeware
	1. Update MCT2 memory Code., 2. Fixed System Cannot Enter S3 When Use USB Mouse and No PS2 Mouse., 3. To Support Sempron 754 REC.E3 CPU PST table, 4. Fixed DIMMs Compatibility, 5. Fixed Lan Led Issue., 6. Fixed BIOS Setup Screen Item Show Issue. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 14-03-2005 | Size: 50 KB
	-

	ECS NFORCE4-A754(1.0) Bios v 1.0e  License: Freeware
	1. Update MCT2 memory Code., 2. Fixed System Cannot Enter S3 When Use USB Mouse and No PS2 Mouse., 3. To Support Sempron 754 REC.E3 CPU PST table, 4. Fixed DIMMs Compatibility, 5. Fixed Lan Led Issue., 6. Fixed BIOS Setup Screen Item Show Issue. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 24-03-2005 | Size: 50 KB
	-

	ANALYZER for RECOVER Fixed/Floppy Disk  License: Freeware
	ANALYZER for RECOVER Fixed/Floppy Disk V0.2 FREEWARE visually reports on bad sectors in system area of floppy disk. You can check if Boot Sector, FAT 1, FAT 2, and ROOT FOLDER sectors are good or bad. You find how much of remaining file system can help recover files when you use RECOVER Fixed/Floppy Disk. While RECOVER Fixed/Floppy Disk (RFD) brings simplicity into data recovery, ANALYZER for RECOVER Fixed/Floppy Disk V0.2 gives a head start to using RFD. When Boot Sector on floppy is bad, WINDOWS 98SE displays a window with this error message: The disk in drive A: is not formatted: Do you want to format it now? When 1st FAT sector on floppy is bad, WINDOWS 98SE displays the same error message for reasons known to itself. When first Root Folder Sector is bad, WINDOWS 98SE displayed a window with this error message: A: is not accessible: The system cannot read from the specified device If it is the Boot Sector or the 1st FAT sector or both that is/are damaged, you can use RECOVER Fixed/Floppy Disk to recover your files. If ROOT FOLDER got damaged, if your disk analysis shows that first few sectors are good, you can use RECOVER Fixed/Floppy Disk. If you run Disk Defragmenter quite often, even if both FAT copies got damaged, you can recover your files by using RECOVER Fixed/Floppy Disk. Must-have disk utility. No more groping around for locating disk surface damage in system area. If your OS says it can do nothing, it is not going to affect your decision making. ANALYZER for RECOVER Fixed/Floppy Disk V0.2 gives you a head start in accurately locating disk errors that unsettle the Operating System. You can figure out what system area got damaged and to what extent. This serves as a starting point for using RECOVER Fixed/Floppy Disk. ANALYZER for RECOVER Fixed/Floppy Disk V0.2 simplifies reporting on Boot Sector, FAT copies and ROOT FOLDER to a single page. You get INT 25H sector numbers and readability status in color codes on screen. Author: Systech Software| Date: 21-06-2004 | Size: 17 KB
	-

	inadyn  License: Freeware
	INADYN is a free, small, easy portable DynDNS client. It gives the possibility to have your own fixed hostname registered on the internet, although your IP might be changing. It checks periodically whether the IP address stored by the DNS server is the real current IP address of the machine that is running INADYN. Author: Ina-tech| Date: 11-09-2005 | Size: 78 KB
	-

	ECS 915P-A(1.1) Bios v 050322  License: Freeware
	1.Fixed system cannot resume from S3 if used SATA HDD slave driver., 2.Fixed system sometimes hang up d1 during POST if used P4 0F43 CPU running ON/OFF.EXE program., 3.Support TM/TM2 function in CMOS Setup, 4.Fixed system sometimes hang up d1 during POST if used P4 M0 stepping CPU., 5.Adding "Execute Disable Bit" function in Advanced Setup of CMOS Setup, 6.Fix sometimes cannot boot issue, 7.Fix Prescott EE CPU Temperature incorrect, 8.Fixed S3 function cannot wake up., 9. Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 12-04-2005 | Size: 50 KB
	-

	ECS 915G-A(1.2A) Bios v 050322  License: Freeware
	1.Fixed system cannot resume from S3 if used SATA HDD slave driver., 2.Fixed system sometimes hang up d1 during POST if used P4 0F43 CPU running ON/OFF.EXE program., 3.Support TM/TM2 function in CMOS Setup, 4.Fixed system sometimes hang up d1 during POST if used P4 M0 stepping CPU., 5.Adding "Execute Disable Bit" function in Advanced Setup of CMOS Setup, 6.Fix sometimes cannot boot issue, 7.Fix Prescott EE CPU Temperature incorrect, 8.Fixed S3 function cannot wake up., 9. Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 12-04-2005 | Size: 50 KB
	-

	ECS 915P-A(1.2A) Bios v 050322  License: Freeware
	1.Fixed system cannot resume from S3 if used SATA HDD slave driver., 2.Fixed system sometimes hang up d1 during POST if used P4 0F43 CPU running ON/OFF.EXE program., 3.Support TM/TM2 function in CMOS Setup, 4.Fixed system sometimes hang up d1 during POST if used P4 M0 stepping CPU., 5.Adding "Execute Disable Bit" function in Advanced Setup of CMOS Setup, 6.Fix sometimes cannot boot issue, 7.Fix Prescott EE CPU Temperature incorrect, 8.Fixed S3 function cannot wake up., 9. Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 12-04-2005 | Size: 50 KB
	-

	ECS 915G-A(1.2A) Bios v 050729  License: Freeware
	-Fixed wrong memory size in WinXP system information issue, -Patch code for CPU temperature, -Fixed system cannot resume from S3 if used SATA HDD slave driver., -Fixed system sometimes hang up d1 during POST if used P4 0F43 CPU running ON/OFF.EXE program., -Support TM/TM2 function in CMOS Setup, -Fixed system sometimes hang up d1 during POST if used P4 M0 stepping CPU., -Adding "Execute Disable Bit" function in Advanced Setup of CMOS Setup, -Fix sometimes cannot boot issue, -Fix Prescott EE CPU Temperature incorrect, -Fixed S3 function cannot wake up., -Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 11-08-2005 | Size: 50 KB
	-

	ECS 915P-A(1.1) Bios v 050729  License: Freeware
	-Fixed wrong memory size in WinXP system information issue, -Patch code for CPU temperature, -Fixed system cannot resume from S3 if used SATA HDD slave driver., -Fixed system sometimes hang up d1 during POST if used P4 0F43 CPU running ON/OFF.EXE program., -Support TM/TM2 function in CMOS Setup, -Fixed system sometimes hang up d1 during POST if used P4 M0 stepping CPU., -Adding "Execute Disable Bit" function in Advanced Setup of CMOS Setup, -Fix sometimes cannot boot issue, -Fix Prescott EE CPU Temperature incorrect, -Fixed S3 function cannot wake up., -Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 11-08-2005 | Size: 50 KB
	-

	ECS 915P-A(1.2A) Bios v 050729  License: Freeware
	-Fixed wrong memory size in WinXP system information issue, -Patch code for CPU temperature, -Fixed system cannot resume from S3 if used SATA HDD slave driver., -Fixed system sometimes hang up d1 during POST if used P4 0F43 CPU running ON/OFF.EXE program., -Support TM/TM2 function in CMOS Setup, -Fixed system sometimes hang up d1 during POST if used P4 M0 stepping CPU., -Adding "Execute Disable Bit" function in Advanced Setup of CMOS Setup, -Fix sometimes cannot boot issue, -Fix Prescott EE CPU Temperature incorrect, -Fixed S3 function cannot wake up., -Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 11-08-2005 | Size: 50 KB
	-

	Smart Gambler's Calculator for PocketPC OS  License: Freeware
	Smart Gambler's Calculator allows one to calculate the main parameters for fixed-size and fixed-fraction betting. The main input parameters are grouped into several groups. The first group contains data about the properties of a single bet: probability of winning the bet, and the payoff (prize-to-bet ratio). The second group contains parameters of the gambler's "comfort zone": bankroll, number of games to play (or number of bets to place), and desired profit or prize-to-win in these games/bets. The calculator shows the expected value (profit/lose in the long run) and standard deviation (variability) of this gambling or investment opportunity. For the fixed bet, the probabilities of reaching the goal and of losing the bankroll are calculated. For the fixed-fraction betting strategy, the optimal fraction (percentage) of bankroll is determined. In contrast to Kelly's system, in which it is assumed that a player is a risk-averse person (so not a gambler) and which is applicable only to games with positive expected values, this system has none of these restrictions. The optimality is determined in the following way. First of all, the optimal fixed-fraction bet should minimize the probability of ruin. In theory, if money were "infinitely divisible," the probability of ruin in fixed-fraction betting is zero. The second objective/criterion is to maximize the probability of reaching the established goal, and the third objective/criterion is to maximize the expected value of the player's bankroll, subject to restrictions set by the previous criteria. Author: AdvMathAppl| Date: 30-08-2004 | Size: 122 KB
	-

	Smart Gambler's Calculator for Palm OS  License: Freeware
	Smart Gambler's Calculator allows one to calculate the main parameters for fixed-size and fixed-fraction betting. The main input parameters are grouped into several groups. The first group contains data about the properties of a single bet: probability of winning the bet, and the payoff (prize-to-bet ratio). The second group contains parameters of the gambler's "comfort zone": bankroll, number of games to play (or number of bets to place), and desired profit or prize-to-win in these games/bets. The calculator shows the expected value (profit/lose in the long run) and standard deviation (variability) of this gambling or investment opportunity. For the fixed bet, the probabilities of reaching the goal and of losing the bankroll are calculated. For the fixed-fraction betting strategy, the optimal fraction (percentage) of bankroll is determined. In contrast to Kelly's system, in which it is assumed that a player is a risk-averse person (so not a gambler) and which is applicable only to games with positive expected values, this system has none of these restrictions. The optimality is determined in the following way. First of all, the optimal fixed-fraction bet should minimize the probability of ruin. In theory, if money were "infinitely divisible," the probability of ruin in fixed-fraction betting is zero. The second objective/criterion is to maximize the probability of reaching the established goal, and the third objective/criterion is to maximize the expected value of the player's bankroll, subject to restrictions set by the previous criteria. Author: AdvMathAppl| Date: 30-08-2004 | Size: 88 KB
	-

	Smart Gambler's Calculator for Windows OS  License: Freeware
	Smart Gambler's Calculator allows one to calculate the main parameters for fixed-size and fixed-fraction betting. The main input parameters are grouped into several groups. The first group contains data about the properties of a single bet: probability of winning the bet, and the payoff (prize-to-bet ratio). The second group contains parameters of the gambler's "comfort zone": bankroll, number of games to play (or number of bets to place), and desired profit or prize-to-win in these games/bets. The calculator shows the expected value (profit/lose in the long run) and standard deviation (variability) of this gambling or investment opportunity. For the fixed bet, the probabilities of reaching the goal and of losing the bankroll are calculated. For the fixed-fraction betting strategy, the optimal fraction (percentage) of bankroll is determined. In contrast to Kelly's system, in which it is assumed that a player is a risk-averse person (so not a gambler) and which is applicable only to games with positive expected values, this system has none of these restrictions. The optimality is determined in the following way. First of all, the optimal fixed-fraction bet should minimize the probability of ruin. In theory, if money were "infinitely divisible," the probability of ruin in fixed-fraction betting is zero. The second objective/criterion is to maximize the probability of reaching the established goal, and the third objective/criterion is to maximize the expected value of the player's bankroll, subject to restrictions set by the previous criteria. Author: AdvMathAppl| Date: 30-08-2004 | Size: 122 KB
	-

	Magic Pro MP-P4GE Bios v1.07  License: Freeware
	-Modify Fixed AGP/PCI Output Freq at 66MHz/33MHz no work, -Fixed dimm CL3 cant boot issue., -Fixed intel onboard vga cant installed under WINNT 4.0 Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Magic Pro| Date: 22-02-2003 | Size: 50 KB
	-

	AOpen i945Pa-PLF Bios v R1.04  License: Freeware
	- Fixed CMOS checksum error when watchdog event occurs., - Fixed secondary channel unavailable if SATA is set to combine mode., - Fixed 840 CPU ratio error., - Fixed EIST function fail in 840 CPU, - Added Intel Onscreen Branding support for Pentium D CPU and Pentium Extreme Edition CPU., - Updated Microcode to support more CPUs. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: AOpen| Date: 04-08-2005 | Size: 50 KB
	-

	ECS 915P-A(1.1) Bios v 040913  License: Freeware
	1. Fixed S3 function cannot wake up.2. Fixed VGA/Sound TEST program failure in DOS mode.3. Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP.4. Fixed 3.6GHz cannot boot at revision 1.1.5. Fixed CPU/SYSTEM Temperature are incorrect between Rev1.1 and Rev1.2A.6. Disappearing warning message on boot screen if connecting power 20 pin.7. Adding ATI PCI-E workround program.8.Changing HT Technology default setting to "Enabled" in CMOS setup menu.9.Add AGP Express function Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 15-09-2004 | Size: 50 KB
	-

	Plextor PlexWriter 16/10/40A Firmware v 1.05  License: Freeware
	- Fixed a bug where the drive could not mount a CD-RW disc formatted by InCD v3.16., - Fixed a bug where the drive may hang when scanning a mixed mode CD with CD Creator 5.1.1.102., - Fixed a bug where an Auto-Run disc does not run on Windows XP system if the disc is the first one inserted after power on., - Fixed a bug where the system would freeze when coming out of stand-by mode on Windows 2000., - Added support for Orange Book Part 2 Volume 2 version 1.1., Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Plextor| Date: 22-04-2002 | Size: 50 KB
	-

	Aopen AX4SG-UN Bios v R1.15  License: Freeware
	- Fixed no 80 conductor cable installed is always showed when 40pin cable and ATA33 CDROM are plugged., - Fixed Matrox G450/G550 crashes., - Fixed AC PWR Auto Recovery cant work when AC PWR Auto Recovery = On and Soft-Off by PWR-BTTN = Delay 4 Sec. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: AOpen| Date: 18-01-2005 | Size: 50 KB
	-

	Plextor PlexWriter 24/10/40 Firmware v 1.04  License: Freeware
	- Added support for Taiyo Yuden 40X and Verbatim 40X media., - Added support for Orange Book part 2 volume 2 version 1.1., - Fixed a bug where the drive may hang if burnproof occurred during the writing of the lead-out., - Fixed a bug where there may be a comparison error when creating a VideoCD., - Fixed a bug where the drive was not recognized when attached to a Workbit ATA-1394/USB1.1 bridge board., - Fixed a bug where the drive may hang when scanning a mixed mode CD with CD Creator 5.1.1.102. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Plextor| Date: 22-04-2002 | Size: 50 KB
	-

	Aopen AX4SG-UL Bios v R1.15  License: Freeware
	- Fixed Matrox G450/G550 crashes., - Fixed no 80 conductor cable installed is always showed when 40pin cable and ATA33 CDROM are plugged., - Fixed AC PWR Auto Recovery caníŽt work when AC PWR Auto Recovery = On and Soft-Off by PWR-BTTN = Delay 4 Sec. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: AOpen| Date: 07-12-2004 | Size: 50 KB
	-

	Aopen AX4SG-UL(P) Bios v R1.15  License: Freeware
	- Fixed Matrox G450/G550 crashes., - Fixed no 80 conductor cable installed is always showed when 40pin cable and ATA33 CDROM are plugged., - Fixed AC PWR Auto Recovery caníŽt work when AC PWR Auto Recovery = On and Soft-Off by PWR-BTTN = Delay 4 Sec. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: AOpen| Date: 07-12-2004 | Size: 50 KB
	-

	Aopen AX4SG-UN(P) Bios v R1.15  License: Freeware
	- Fixed no 80 conductor cable installed is always showed when 40pin cable and ATA33 CDROM are plugged., - Fixed Matrox G450/G550 crashes., - Fixed AC PWR Auto Recovery caníŽt work when AC PWR Auto Recovery = On and Soft-Off by PWR-BTTN = Delay 4 Sec. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: AOpen| Date: 18-01-2005 | Size: 50 KB
	-

	Plextor PlexWriter 4/12 Firmware v 1.07  License: Freeware
	- Improved initialization time of CD-RW media, CD Text format discs, and discs that are not closed., - Improved read performance of CD-RW media., - Added support for reading CD-Text format discs., - Fixed audio capture bug with Adaptecs Toast software for Mac., - Improved read performance of XA discs., - Fixed a bug reading discs written with Fixed Packet method., - Improved initialization time of Audio CDs with open session., - Fixed a bug writing CD+G format discs. This bug was introduced in firmware release 1.06; graphics were not in synch with audio (delayed)., - Improved Fixed Packet write performance. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Plextor| Date: 16-01-2001 | Size: 50 KB
	-

	ECS 915G-A(1.2A) Bios v 040913  License: Freeware
	1. Fixed S3 function cannot wake up.2. Fixed VGA/Sound TEST program failure in DOS mode3. Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP.4. Fixed 3.6GHz cannot boot at revision 1.15. Fixed CPU/SYSTEM Temperature are incorrect between Rev1.1 and Rev1.2A6. Disappearing warning message on boot screen if connecting power 20 pin7. Adding ATI PCI-E workround program8. Support "DDR Voltage Control" and "PCI-E Voltage Control" and "CPU Voltage Control" function in CMOS setup9. Changing HT Technology default setting to "Enabled" in CMOS setup menu10. Add AGP Express function Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 15-09-2004 | Size: 50 KB
	-

	ECS 915P-A(1.2A) Bios v 040913  License: Freeware
	1. Fixed S3 function cannot wake up.2. Fixed VGA/Sound TEST program failure in DOS mode3. Fixed Nvidia PCI-E X16 VGA only displayed 4bit mode when installing XP.4. Fixed 3.6GHz cannot boot at revision 1.15. Fixed CPU/SYSTEM Temperature are incorrect between Rev1.1 and Rev1.2A6. Disappearing warning message on boot screen if connecting power 20 pin7. Adding ATI PCI-E workround program8. Support "DDR Voltage Control" and "PCI-E Voltage Control" and "CPU Voltage Control" function in CMOS setup9. Changing HT Technology default setting to "Enabled" in CMOS setup menu10. Add AGP Express function Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 15-09-2004 | Size: 50 KB
	-

| 1 | 2 | 3 | 4 | 5 |