Freeware: Fix

	Free Registry Fixer  License: Freeware
	Free Registry Fix is the Worlds only FREE Registry Cleaning software on the market today. It will safely clean and repair Windows registry problems with a few simple clicks and enable you to enjoy a cleaner and more efficient PC. The Registry is the nerve center of your PC and problems with the Windows registry are a common cause of Windows crashes and error messages. Free Registry Fix uses high-performance Registry conflict identification algorithms to rapidly identify problems in the Windows registry. These problems can occur for many reasons including uninstalling software with poor un-installation routines, improperly deleting files and orphaned startup programs. Fully supported 24x7 with Microsoft Certified technicians. Author: Promosoft Corporation| Date: 19-05-2005 | Size: 1504 KB
	-

	Image Resizer  License: Freeware
	The Image Resizer allows you to resize/scale multiple images by percentage or by a fixed width/height. You can also apply a greyscale filter on-the-fly to scaled images. Drag and Drop enabled. Sports an extremely easy GUI interface. Author: Mikhail Esteves| Date: 27-10-2004 | Size: 295 KB
	-

	ANALYZER for RECOVER Fixed/Floppy Disk  License: Freeware
	ANALYZER for RECOVER Fixed/Floppy Disk V0.2 FREEWARE visually reports on bad sectors in system area of floppy disk. You can check if Boot Sector, FAT 1, FAT 2, and ROOT FOLDER sectors are good or bad. You find how much of remaining file system can help recover files when you use RECOVER Fixed/Floppy Disk. While RECOVER Fixed/Floppy Disk (RFD) brings simplicity into data recovery, ANALYZER for RECOVER Fixed/Floppy Disk V0.2 gives a head start to using RFD. When Boot Sector on floppy is bad, WINDOWS 98SE displays a window with this error message: The disk in drive A: is not formatted: Do you want to format it now? When 1st FAT sector on floppy is bad, WINDOWS 98SE displays the same error message for reasons known to itself. When first Root Folder Sector is bad, WINDOWS 98SE displayed a window with this error message: A: is not accessible: The system cannot read from the specified device If it is the Boot Sector or the 1st FAT sector or both that is/are damaged, you can use RECOVER Fixed/Floppy Disk to recover your files. If ROOT FOLDER got damaged, if your disk analysis shows that first few sectors are good, you can use RECOVER Fixed/Floppy Disk. If you run Disk Defragmenter quite often, even if both FAT copies got damaged, you can recover your files by using RECOVER Fixed/Floppy Disk. Must-have disk utility. No more groping around for locating disk surface damage in system area. If your OS says it can do nothing, it is not going to affect your decision making. ANALYZER for RECOVER Fixed/Floppy Disk V0.2 gives you a head start in accurately locating disk errors that unsettle the Operating System. You can figure out what system area got damaged and to what extent. This serves as a starting point for using RECOVER Fixed/Floppy Disk. ANALYZER for RECOVER Fixed/Floppy Disk V0.2 simplifies reporting on Boot Sector, FAT copies and ROOT FOLDER to a single page. You get INT 25H sector numbers and readability status in color codes on screen. Author: Systech Software| Date: 21-06-2004 | Size: 17 KB
	-

	ECS P4M800-M7(1.0) Bios v 050808  License: Freeware
	-Fixed DRAM Frequency incorrectly if w/o loading optimal setting after clearing cmos, -Fixed cpu over-clocking function could not work properly Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 19-08-2005 | Size: 50 KB
	-

	Recover Fixed/Floppy Disk  License: Freeware
	RECOVER Fixed/Floppy Disk v1.4 ( 5-star rated). Folder / File level Data Recovery Utility for Hard Disk Drives and Floppy Disks. RECOVER Fixed/Floppy Disk handles File Allocation Table (FAT) damage and subfolder damage. If FAT damage should not affect you, just defragment the file system as often as you can. If subfolder damage should not affect you, save the subfolder to a safe location. This FREEWARE version would not save the Root Folder for later use. RECOVER Fixed/Floppy Disk handles these error conditions at individual folder level. Recovers all the files from the specified directory on 16-bit and 12-bit FAT file systems in DOS and WINDOWS even if both copies of the FAT have considerable number of damaged sectors, if the disk involved had been regularly defragmented. If FAT is good, FAT1 or FAT2 can be used. All you need to do is put all your important files in a few directories (note: entire drives can be ZIPped up and sent to the backup drive) and defrag that backup drive after each update and if you want to be playful enough, note down the first sector of file(s) or if you want 100 percent safety, save the subdirectory having your important data as a file somewhere else. IF YOU DEFRAG FLOPPY/HDD REGULARLY, YOU GET THE UTMOST BENEFIT. Supports FAT12 File Systems (Floppies) from DOS to WINDOWS 98SE and FAT16 File Systems in DOS, WINDOWS 3.1/3.11, WINDOWS 95, and (up to 2 GB partitions in) WINDOWS 95-OSR2, WINDOWS 98 and WINDOWS 98SE (HDD can be 120 GB). This program is certainly for those who backup because backup programs never talk about uncertainties w.r.t. FAT and Directory entries. A floppy ora FAT16 partition needed to get started. You can find out the TECHIE in you. Author: Systech Software| Date: 05-11-2001 | Size: 37 KB
	-

	Creative USB Sound Blaster Audigy 2 NX Driver v. 1.00.0010  License: Freeware
	Creative USB Sound Blaster Audigy 2 NX update 1.00.0010, AUDX-WBUP2-W3-LAThis standalone update provides improvements for your Creative Sound Blaster« AudigyÖ 2 NX on Microsoft Windows« XP Service Pack 2 (SP2) and Microsoft Windows 2000 Service Pack 4 (SP4) operating systems.This update includes: * Driver Package (CT V1.00.0010), * Firmware Upgrade (V1.1.050119), * DVD-A Player Update (V1.51.12)Fixes * Enables USB 2.0 functionality when used with the Windows XP SP2 update, * Improves playback of media files while EAX Console is running, * Enables a DVD-Audio disc to be inserted while EAX Console is running, * Improves DVD-Audio playback using your Sound Blaster Audigy 2 NX, * Enables playback of DVD-Video using InterVideo«s WinDVD« software while selecting the hardware acceleration option, * Enables saving new SoundFont banks using SoundFont Bank Manager, * Improves recordings set to 24-bit at 96kHz in Device Control, * Improves sample output via SPDIF at 96 kHz when the Digital Output Only mode is enabled, * Enables Creative MediaSource DVD-Audio Player to start properly when either EAX Console or Creative MediaSource Player/Organizer application is running.Requirements: * Windows XP SP2 or Windows 2000 SP4, * Sound Blaster Audigy 2 NX installed and connected.Notes: * If you have the Sound Blaster Audigy 2 NX Installation CD, be sure to complete the installation of Creative applications before installing this update., * Before you use this update for your Sound Blaster Audigy 2 NX, make sure that no other applications are running or active in your computer., * When installing this update, do not disconnect Sound Blaster Audigy 2 NX. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows XP Author: Creative| Date: 05-04-2005 | Size: 50 KB
	-

	RomCenter  License: Freeware
	If you already tried to install an emulator, you know that the main problem comes from the roms. They have to be correctly dumped, their names must match those required by the emulator and they need to be complete. RomCenter is a rom manager. It takes care of your roms, audits and fixes them to get perfect games files to play with your emulators. More than 60000 games can be fixed. All consoles, arcade, computers and handheld are available. RomCenter features internal database web update, powerfull repair engine, zip support, advanced filtering support, miss/have report, multiple roms directories, fast rom scanner, professional interface and much more. Databases files (called datafiles) widely available for all games systems including arcade (coin-op, pinball), computers (amiga, atari 800/2600/5200/7800/ST, amstrad, apple 2/gs, commodore 16/20/64/128, adam, dragon, msx, oric, sharp, thmson, ti, spectrum...), consoles (lynx, game gear, gameboy color/advance, intelivision, jaguar, nintendo 64, neogeo, neogeo pocket, nes/famicon, snes/super famicon, pc engine, sega genesis/megadrive/master system/32X, vectrex...). RomCenter is the first rom manager with more than 60000 download. Author: Eric Bole-Feysot| Date: 23-10-2003 | Size: 2439 KB
	-

	Sound Blaster Audigy 2 and Audigy 2 ZS audio drivers DRM update 1.84.0055  License: Freeware
	Digital Rights Management 1.84.0055 for Sound Blaster Audigy 2 and Audigy 2 ZS series audio devices, SBA2-WEBUP-W8-LBThis web update combines the features and fixes of three previous updates: - Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update (released on 29 July, 2004), - EAX 4.0 ADVANCED HD Driver Patch Update for Sound Blaster Audigy 2 and Audigy 2 ZS (released on 29 March, 2004), - EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2 and Audigy 2 ZS (released on 19 November, 2003).In addition, this update adds Digital Rights Management (DRM) support for Sound Blaster« Audigy« 2 and Audigy 2 ZS series internal audio devices.Added Features or Enhancements: - Enables Digital Rights Management support., - Features and enhancements provided by the above three updates.Requirements: - Microsoft« Windows« XP Service Pack 2 or Windows 2000 Service Pack 4, - Creative Sound Blaster Audigy 2 or Audigy 2 ZS series internal audio device, - EAX 4.0 ADVANCED HD Driver Patch Update for Sound Blaster Audigy 2 and Audigy 2 ZS (released on 29 March, 2004) installed, - Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update (released on 29 July, 2004) installed.Notes: - You can install this update in place of the following:, o EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2 and Audigy 2 ZS (released on 19 November, 2003), o EAX 4.0 ADVANCED HD Driver Patch Update for Sound Blaster Audigy 2 and Audigy 2 ZS (released on 29 March, 2004), o Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update (released on 29 July, 2004)., - Do not install this update for a Sound Blaster Audigy 2 Value or an external Sound Blaster audio device. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 2000/XP Author: Creative| Date: 29-11-2004 | Size: 50 KB
	-

	Pioneer DVR-110D Firmware v 1.22  License: Freeware
	EFixes an issue to cause operational malfucntion of the drive eject button combined with a writing software with Windows ME., üECD-R Readability has improved, üEDVD-RAM Readability has improved, üEDVD+R DL Writability has improvedTray DVD-R/RW (ATAPI), Once updated to version 1.22, this drive will not revert to older firmware versions. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Pioneer| Date: 04-10-2005 | Size: 50 KB
	-

	kX Project Drivers 5.00.3534  License: Freeware
	The kX Project is an independent development project, focused on providing free WDM Audio Drivers for kX-Compatible sound cards. Read our Mission statement for a quick introduction.The kX Audio Driver is an independent WDM (Windows Driver Model) driver for all EMU10K1 and EMU10K2-based soundcards manufactured by Creative Technology Ltd. and/or E-mu Systems Inc., including the SoundBlaster Live! series, the E-mu Audio Production Studio (APS) card, and the Audigy / Audigy2 series of cards. (Full List).The kX Audio Driver package includes driver system files and setup files as well as a powerful audio mixer application (the kX Mixer), which acts as a Graphical User Interface, providing access to many of the drivers internal functions. The following features are either fully supported or partially supported in the latest release of the kX Audio Driver: * Wave Recording & Playback, * MIDI Synthesizer (Soundfont-based) and MIDI UART In/Out, * DirectSound 2D and DirectSound 3D, * Full ASIO and GSIF support, * DSP Microcode Loading/Unloading, * Full AC97 codec control, * AC3 Software DecodingThe kX Driver is FREE and will remain FREE. Please note that you can always encourage development by making a donation to the kX Fund. As one of our contributors has pointed out, if all satisfied kX users made even a very modest donation (say $10 each), it would go a long way towards deferring our costs and would further encourage development of new features (and elimination of old bugs). 02/17/2004 - Version 5.00.3537 (BETA) releasedFixed SMP/HyperThreading compatibility issues, Fixed bug with invalid 24/96 loopback volume level, Fixed bug with invalid 24/96 Master volume after reboot, Improved SPDIF output quality for Audigy2 boards, Swedish, Polish, Brazilian Portuguese, Spanish, Italian, French, Danish and German translations updated, Fixed bug with AC-3 Passthru on Audigy2-based boards, Fixed bug with incorrect handling of DOO mode for certain boards, Added support for 48000 and 192000 sampling rates for the Wave HQ device, Support for 44100 is not available at the moment (additional research is necessary), Added support for 32-bit (32-32) format for Kernel Streaming clients (fake :)), Default levels for CD-Digital and SPDIF-In set to -inf, Fixed bug with FXMix2 plugin (10k1-compatibility issue), Improved RemoteIR support for trayed WinAmp and Foobar, Improved RPN/NRPN support (fixed certain formulas), Fixed bug with kX Mixer handling default device change incorrectly, Fixed bug with invalid kX1/MicIn and kX0/LineIn to AC97 In mappings (0dB = 100%), Fixed invalid AC97 recording gain visualization, Added Unload all SoundFonts button, Added an option to filter EAX calls (Driver compatibility), Updated IO Status window, kX API: hidden kX DSP objects partially implemented, Minor kX Setup improvements, Fixed minor bug with default routings and kX Router applet, Added support for SB22x model, Fixed minor bug with 24/96 Wave HQ volume, Added support for (32-0) formats, S/PDIF sampling rate is now automatically set/reset when AC-3 Passthru is active, Fixed bug with SPDIF 24/96 recording (Wave HQ device), Fixed minor SoundFont/SFMan-related issue, Added support for certain OEM cards, Fixed bug with p16v recording source selection causing reboots, Fixed bug with AC97-In +/- 12dB jump on mute/unmute, Added two NoiseGate plugins, Added compatibility option for Audigy2 passthru, Improved RemoteIR compatibility with certain WinAmp versions, Added option to disable S/PDIF notifications, Improved RemoteIR support (details...), Fixed bug with certain settings not saved on reboot, Improved MIDI UART IRQ handling, Major SoundFont memory management improvement (support for large SoundFonts added), Some SoundFont-related optimizations (voice management engine), Improved UART Input/Output, Added CLEAX4Reverb effect with certain presets (ALPHA), Added option to turn on/off AC97 to Front Speakers routing (for 10k2 cards: kxctrl -shw 19 1), Certain AC-3 decoding engine improvements, Fixed issue with kX Router restoring settings incorrectly after Hibernate Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: kX Project| Date: 17-02-2004 | Size: 50 KB
	-

	BIMP Batch Image Processor  License: Freeware
	BIMP is a small and simple batch processor for image files, that allows you to perform various functions on multiple images. It can be used to create thumbnail images from your pictures, add a prefix/postfix, replace spaces in the file name with underscores, flip or rotate images and also apply anti-aliasing and emboss effects. The thumbnail resizing allows you to force a specified width or height and keep the proportions, or define fixed image dimensions. In addition, the program can also convert the file format to GIF, JPG, TIFF, PNG, BMP, MIFF or TGA. All of the actions can be performed individually, or combined. Author: Cerebral Synergy| Date: 11-04-2004 | Size: 1778 KB
	-

	Creative USB Sound Blaster Audigy 2 NX v. 1.0.10  License: Freeware
	Creative USB Sound Blaster Audigy 2 NX update 1.00.0010, AUDX-WBUP2-W3-LAThis standalone update provides improvements for your Creative Sound Blaster« AudigyÖ 2 NX on Microsoft Windows« XP Service Pack 2 (SP2) and Microsoft Windows 2000 Service Pack 4 (SP4) operating systems.This update includes: * Driver Package (CT V1.00.0010), * Firmware Upgrade (V1.1.050119), * DVD-A Player Update (V1.51.12)Fixes * Enables USB 2.0 functionality when used with the Windows XP SP2 update, * Improves playback of media files while EAX Console is running, * Enables a DVD-Audio disc to be inserted while EAX Console is running, * Improves DVD-Audio playback using your Sound Blaster Audigy 2 NX, * Enables playback of DVD-Video using InterVideo«s WinDVD« software while selecting the hardware acceleration option, * Enables saving new SoundFont banks using SoundFont Bank Manager, * Improves recordings set to 24-bit at 96kHz in Device Control, * Improves sample output via SPDIF at 96 kHz when the Digital Output Only mode is enabled, * Enables Creative MediaSource DVD-Audio Player to start properly when either EAX Console or Creative MediaSource Player/Organizer application is running.Requirements: * Windows XP SP2 or Windows 2000 SP4, * Sound Blaster Audigy 2 NX installed and connected.Notes: * If you have the Sound Blaster Audigy 2 NX Installation CD, be sure to complete the installation of Creative applications before installing this update., * Before you use this update for your Sound Blaster Audigy 2 NX, make sure that no other applications are running or active in your computer., * When installing this update, do not disconnect Sound Blaster Audigy 2 NX. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows XP Author: Creative| Date: 05-04-2005 | Size: 50 KB
	-

	MSN Font Color Editor  License: Freeware
	Choose the font color you like for your MSN from 32-bit true colors. Tired of MSN’s fixed font colors? Use this tiny application to change it to the color you love. It is easy and fun to use. You may need to restart MSN for the changes to take place. Author: Web Solution Mart| Date: 01-09-2005 | Size: 341 KB
	-

	Advanced WindowsCare  License: Freeware
	Slow down, freeze and crash are over. Repair and cure your windows with 1 click. Unlike other utility, Advanced WindowsCare does not do simple registry cleaning. It thoroughly examines Windows system, accurately detects the bottleneck for slowing down and crashing, and fixes them. With the novel system technology, Advanced WindowsCare empowers you to run computer faster, more stably and more efficiently than with any other system utilities. Author: IObit| Date: 02-01-2006 | Size: 2228 KB
	-

	Pinnacle PCTV Deluxe v.1.20 Beta  License: Freeware
	Whats new in build 49: * Base driver [revised], * capture stability imporved, * tuning parameter reworked, * fix a/v sync. problems Attention:, Please be sure to de-install any older versions and disconnect PCTV DeLuxe before installing this build. Also make sure that you have no active internet connection open during the install and the first time you run Vision. Since this beta driver is not certified yet, it might happen that the new driver will be replaced by the old certified one if you have an open internet connection. You will not be asked about this, this is a Windows update feature.DirectX9b has to be installed on your PC before you run this Software Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Pinnacle| Date: 19-11-2003 | Size: 50 KB
	-

	Pinnacle PCTV Deluxe 1.7 (49) beta Drivers  License: Freeware
	Whats new in build 49: * Base driver [revised], * capture stability imporved, * tuning parameter reworked, * fix a/v sync. problems Attention:, Please be sure to de-install any older versions and disconnect PCTV DeLuxe before installing this build. Also make sure that you have no active internet connection open during the install and the first time you run Vision. Since this beta driver is not certified yet, it might happen that the new driver will be replaced by the old certified one if you have an open internet connection. You will not be asked about this, this is a Windows update feature.DirectX9b has to be installed on your PC before you run this Software Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Pinnacle| Date: 19-11-2003 | Size: 50 KB
	-

	Creative Sound Blaster X-Fi series Driver v 2.07.0003  License: Freeware
	This full driver includes updates and fixes for Sound Blaster X-FiÖ on Microsoft« Windows« XP Service Pack 2 (SP2) operating systems. It may be used by those who may have misplaced the Sound Blaster X-Fi Installation CD.Fixes: * Resolves audio issues and improves audio playback.Requirements: * Windows XP SP2, * Sound Blaster X-Fi series audio deviceNotes: * To install this driver:, 1. Double-click the downloaded file., 2. Follow the instructions on the screen., * To use the Sound Blaster X-Fi features and functions, download and install the Creative Audio Console web release. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: Creative| Date: 25-08-2005 | Size: 50 KB
	-

	ECS K7VZA (3.0) Bios  License: Freeware
	Fixes the K7VZA v3.0 system hung up after Windows Update patch Q811493. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 16-04-2004 | Size: 50 KB
	-

	Windows 2000 Service Pack 3 (SP3)  License: Freeware
	Windows 2000 Service Pack 3 (SP3) provides the latest updates to the Windows 2000 family of operating systems. These updates are a collection of fixes in the following areas: application compatibility, operating system reliability, security, and setup. Windows 2000 SP3 includes the updates contained in Windows 2000 Service Pack 1 (SP1), Windows 2000 Service Pack 2 (SP2) and Windows 2000 Security Rollup Package 1. Windows 2000 SP3 is a recommended upgrade. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 2000 Author: Microsoft| Date: 01-08-2002 | Size: 50 KB
	-

	ECS PM800-M2(1.0) Bios v 1.2b  License: Freeware
	BIOS for PM800-M2(PCB:1.0)1. Update micro code., 2. Set NX BIOS Function Default is Disabled., 3. Fixed Prescott CPU speed 3.4G shows 2.8G, 4. Support ATMEL flash ROM., 5. Patch ATI 9800 AGP card compatiblity., 6. Fixed some k/B mouse cannot resume from S1 Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 14-12-2004 | Size: 50 KB
	-

	ECS K7VTA3(8.0) Bios v 8.0e  License: Freeware
	1. Supports Sempron Model 10.2. Supports Sempron processor BrandID. (2200+/2300+/3000+)L2 256K3. Supports 0.13 New Duron FSB 133Mhz CPU.4. Fixed PowerON after PWR-fail function fail. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 19-09-2004 | Size: 50 KB
	-

	ASUS A8N-SLI Bios v 1010  License: Freeware
	A8N-SLI Bios version 1010, Please do read the description before updating BIOS, To avoid damaging system, please do update the chipset driver to below version prior to this Bios., For WinXP 32bit system, please download and update chipset drivers V6.65 or later, For WinXP 64bit system, please download and update chipset drivers V6.65 or later, For Win2k/2003 32bit system, please download and update chipset drivers V6.66 or later, For Win2003 64bit system, please download and update chipset drivers V6.66 or later, 1. Fixed system will hang in memory test 2.09GB if Quick Boot disabled., 2. Change class code of SATA to fit new Driver (WHQL) if RAID is enabled., 3. Fixed system cannot detect ARC 12xx Serial ATA RAID Host adapter., 4. Fixed K8 Vcore will set wrong value under AI-Booster. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ASUS| Date: 09-08-2005 | Size: 50 KB
	-

	WinUpdatesList  License: Freeware
	WinUpdatesList displays the list of all Windows updates (Service Packs and Hotfixes) installed on your local computer. For hotfix updates, this utility also displays the list of files updated with these hotfixes. In addition, it allows you to instantly open the Web link in Microsoft Web site that provides more information about the selected update, uninstall an update, copy the update information to the clipboard, or save it to text/HTML/XML file. Author: NirSoft| Date: 01-08-2004 | Size: 39 KB
	-

	Sound Blaster PCI 512 Driver Update (Windows 95/98/Me) 4.06.711  License: Freeware
	This is the latest driver update for the Sound Blaster PCI512 for Win95/98 and Windows ME. This update improves EAX performance, and fixes EAX blue-screen errors. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 95/98/Me Author: Creative Technology| Date: 30-10-2002 | Size: 50 KB
	-

	EasyCapture  License: Freeware
	EasyCapture is a powerful, flexible and easy-to-use free screen capture software. It allows you to capture anything on the screen including windows, objects, full screen, rectangle-selected regions, fix size regions, and scrolling windows/web pages. It also allow you to edit captured image and add annotate. It's perfect for capturing images that you want to include in your Help system, online tutorials, manuals, training handouts, presentations, marketing materials, Web pages, emails and more. Use EasyCapture to quickly share a picture-perfect representation of anything on your screen. Author: XYStudio| Date: 10-11-2007 | Size: 2622 KB
	-

	kX Project Audio Drivers 5.00.3537 Beta  License: Freeware
	The kX Project is an independent development project, focused on providing free WDM Audio Drivers for kX-Compatible sound cards. Read our Mission statement for a quick introduction.The kX Audio Driver is an independent WDM (Windows Driver Model) driver for all EMU10K1 and EMU10K2-based soundcards manufactured by Creative Technology Ltd. and/or E-mu Systems Inc., including the SoundBlaster Live! series, the E-mu Audio Production Studio (APS) card, and the Audigy / Audigy2 series of cards. (Full List).The kX Audio Driver package includes driver system files and setup files as well as a powerful audio mixer application (the kX Mixer), which acts as a Graphical User Interface, providing access to many of the drivers internal functions. The following features are either fully supported or partially supported in the latest release of the kX Audio Driver: * Wave Recording & Playback, * MIDI Synthesizer (Soundfont-based) and MIDI UART In/Out, * DirectSound 2D and DirectSound 3D, * Full ASIO and GSIF support, * DSP Microcode Loading/Unloading, * Full AC97 codec control, * AC3 Software DecodingThe kX Driver is FREE and will remain FREE. Please note that you can always encourage development by making a donation to the kX Fund. As one of our contributors has pointed out, if all satisfied kX users made even a very modest donation (say $10 each), it would go a long way towards deferring our costs and would further encourage development of new features (and elimination of old bugs). 02/17/2004 - Version 5.00.3537 (BETA) releasedFixed SMP/HyperThreading compatibility issues, Fixed bug with invalid 24/96 loopback volume level, Fixed bug with invalid 24/96 Master volume after reboot, Improved SPDIF output quality for Audigy2 boards, Swedish, Polish, Brazilian Portuguese, Spanish, Italian, French, Danish and German translations updated, Fixed bug with AC-3 Passthru on Audigy2-based boards, Fixed bug with incorrect handling of DOO mode for certain boards, Added support for 48000 and 192000 sampling rates for the Wave HQ device, Support for 44100 is not available at the moment (additional research is necessary), Added support for 32-bit (32-32) format for Kernel Streaming clients (fake :)), Default levels for CD-Digital and SPDIF-In set to -inf, Fixed bug with FXMix2 plugin (10k1-compatibility issue), Improved RemoteIR support for trayed WinAmp and Foobar, Improved RPN/NRPN support (fixed certain formulas), Fixed bug with kX Mixer handling default device change incorrectly, Fixed bug with invalid kX1/MicIn and kX0/LineIn to AC97 In mappings (0dB = 100%), Fixed invalid AC97 recording gain visualization, Added Unload all SoundFonts button, Added an option to filter EAX calls (Driver compatibility), Updated IO Status window, kX API: hidden kX DSP objects partially implemented, Minor kX Setup improvements, Fixed minor bug with default routings and kX Router applet, Added support for SB22x model, Fixed minor bug with 24/96 Wave HQ volume, Added support for (32-0) formats, S/PDIF sampling rate is now automatically set/reset when AC-3 Passthru is active, Fixed bug with SPDIF 24/96 recording (Wave HQ device), Fixed minor SoundFont/SFMan-related issue, Added support for certain OEM cards, Fixed bug with p16v recording source selection causing reboots, Fixed bug with AC97-In +/- 12dB jump on mute/unmute, Added two NoiseGate plugins, Added compatibility option for Audigy2 passthru, Improved RemoteIR compatibility with certain WinAmp versions, Added option to disable S/PDIF notifications, Improved RemoteIR support (details...), Fixed bug with certain settings not saved on reboot, Improved MIDI UART IRQ handling, Major SoundFont memory management improvement (support for large SoundFonts added), Some SoundFont-related optimizations (voice management engine), Improved UART Input/Output, Added CLEAX4Reverb effect with certain presets (ALPHA), Added option to turn on/off AC97 to Front Speakers routing (for 10k2 cards: kxctrl -shw 19 1), Certain AC-3 decoding engine improvements, Fixed issue with kX Router restoring settings incorrectly after Hibernate Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: kX Project| Date: 17-02-2004 | Size: 50 KB
	-

	ECS PM800-M2(1.0) Bios v 1.2d  License: Freeware
	1. Patches NX , C1E , TM2 function., 2. Supports E0 stepping Hi-ratio frequency, 3. Updated micro code., 4. Sets NX BIOS Function Default is Disabled., 5. Fixed Prescott CPU speed 3.4G shows 2.8G, 6. Supports ATMEL flash ROM., 7. Patches ATI 9800 AGP card compatiblity., 8. Fixed some k/B mouse cannot resume from S1 Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/ME/2000/XP Author: ECS| Date: 04-02-2005 | Size: 50 KB
	-

	Creative Audigy Web Update 2 - Core Driver Package (Windows 2000/XP)  License: Freeware
	This package is an official Creative Labs Beta Release but is NOT provided for download by Creative. This release is primarily for Sound Blaster Audigy users and significantly improves gaming performance for all cards in the Sound Blaster Audigy range. It does however also provide benefits for the Audigy 2 family of cards (as shown below). This release is ideal for high-end gamers who want even better performance than they currently enjoy. This release has been tested by Creative Labs for gaming use ONLY. No other functionality has been tested. It should be noted that the Sound Blaster applications provided with your card may not function after installation of this driver. For mixer and speaker configuration the standard Windows apps can be used. This release will be followed up with a final official driver update that will integrate the performance features with the core driver and application set. The beta release is designed to stop functioning on the 1st of August 2003 by which time the final release previously mentioned will be available.This update is exclusively for Sound Blaster Audigy and Audigy 2 users running on Windows 2000 or XP ONLY. Fixes & Features Sound Blaster Audigy Specific- Sound Blaster Audigy performance increased by 10%-15% for EAX ADVANCED HD- Number of simultaneous voices has been doubled from 32 to 64 Sound Blaster Audigy and Audigy 2 Benefits - Reverb presets setting by game audio engine is now on average 10X faster- EAX Morphing performance enhanced, typically yeilding a 2X improvement in framerates for morphed sections. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 2000/XP Author: Creative| Date: 26-06-2003 | Size: 50 KB
	-

	Matrox Unified Display Drivers (Windows 98/Me) 6.82  License: Freeware
	This driver release supports Millennium G550, Millennium G450, Marvel G450 eTV, Millennium G400, Matrox G200 MMS, Millennium G200, Mystique G200 and MGA G200. The Matrox PowerDesk and ICD are included. TurboGL not supported. This version fixes screen corruptions in sound forge, texture problems in Flight Sim 2002, C++ runtime error in pdesk when switching languages, and more. Before starting this driver installation we suggest you make sure you are installing the latest driver version available. Follow readme instructions/help file for installing drivers when available. Sometimes you need to restart your system for the new installed driver to become active. You can install this driver with the following operating system: Windows 98/Me Author: Matrox Graphics| Date: 27-02-2002 | Size: 50 KB
	-

	Windows Messenger Remover  License: Freeware
	Windows XP has a program called Windows Messenger built into it. By default, this pesky program runs everytime Windows loads. With Windows Messenger Remover you will be able to: Enable Windows Messenger Disable Windows Messenger Disable Windows Messenger from start up Hide Windows Messenger from Outlook Express Remove Windows Messenger If you use Microsoft Windows XP, you owe it to yourself to get this! Download it for free now! Author: Chunky Pig| Date: 03-09-2004 | Size: 365 KB
	-

| 1 | 2 | 3 | 4 | 5 |